wpb036bf73.jpg
THE DEVELOPMENTS OF SMALL-PRIVATE VENTURE "INKERY"

OFFERED FOR COMMERCIALIZATION

Read more:



The following equipment has been developed and is recommended for updating.
Vertical-type gas separators, nominal diameter is 600,  800, 1000, 1200, 1600, 1800, 2000, 2400 mm;
Horizontal-type gas separators, nominal diameter is 1000, 1200, 1400, 1600, 1800 mm;
Blocks of 1st and 2nd  separation  stage: ГБ-23 and ГБ-18 (separation equipment).
Separation filters used for cleaning gas ejected into the gas pool to remove oil, the flow rate (Q) is 1.5 to 5.0  mln m3/24hours.
The unit intended for survey of the oil wells having the output of 100-300-500-1000 m3/24hours under working pressure of up to 15.0MPa. "Header-1".
Oil filter for the lubrication systems updated by fluoroplastic filter elements.
Oil filter intended for cleaning the oil used by sealing systems updated by fluoroplastic filter elements.
Fuel gas filter of the АГРС-type updated by fluoroplastic filter elements.
Filter elements of ФЭП-type.
Filter for cleaning the drinkable water and other liquids.
The hole-bottom fluoroplastic filters intended for the water wells having the output of 25 m3/h (filter 10m long,  column 219mm high).
The drying filters intended for cleaning and drying the natural gas  and  used  by  instrumentation and automation systems and by the control systems of ball cocks.
The heat exchangers intended for the "gas-gas", "gas-liquids" systems which are based on low temperature thermal tubes having the output of 0.5, 1.0, 3.5 mln m3/24hours.
Sampler to define the content of liquid and mechanical admixtures in the natural gas flow at the gas separators output under working pressure of up to 100 kg/cm2.
Filters intended for removal of oil and water contained in the compressed air.
Control of the efficiency of technological equipment installed at gas fields and compressor plants of gas pipelines.
Methods used for the estimation of dispersion composition of dropping liquid in two-phase streams.
Methods used for the estimation of irregation density of the filtering surface to provide the noncontamination mode of operation  for  filter  packs  while  removing    mechanical admixtures contained in natural gas.